S380ST
Your representative
SHYMAN AND ASSOCIATES
wsgoodjr@gmail.com,shymanwilliam@gmail.com
800-246-9041
301-471-2629
The Anderson stationary type single auger A380 mixer (side trap discharge) with side trap discharge, will meet todays needs for high output and intensive use. It has been developed for farms where the footprint of the machine is an important factor. These mixers are compact and highly maneuvrable.
| Capacity | |
|---|---|
| Capacity (no capacity extension) | 380 ft3 (10,8 m3) |
| 6 in capacity extension | 420 ft3 (11,9 m3) |
| 12 in capacity extension | 460ft3 (13 m3) |
| 18 in capacity extension | 500 ft3 (14,2 m3) |
| Number of Auger | 1 |
| Dimensions | |
|---|---|
| Length (A) | 154 in (3,91 m) |
| Height (B) no extension | 100 in (2,54 m) |
| 6 in capacity extension | 106 in (2,69 m) |
| 12 in capacity extension | 112 in (2,84 m) |
| 18 in capacity extension | 118 in (3 m) |
| Hay retention ring (additionnal height) | 0 in / 3,5 in |
| Width (C) | |
| Without incline conveyor | 101 in (2,57 m) |
| With incline conveyor (retracted) | 117 in (2,97 m) |
| Incline conveyor operating angle (degrees) | 26 @ 39 |
| Lateral distance to discharge inint (D) | |
| Incline conveyor 3ft Chain-Belt 26° | 30in(76cm)-34in(86cm) |
| Incline conveyor 4ft Chain-Belt 26° | 34in(86cm) -38in(97cm) |
| Incline conveyor 5ft Chain-Belt 26° | 41in(104cm) -45in(114cm) |
| Incline conveyor 6ft Chain-Belt 26° | 46in(117cm) -50in(127cm) |
| Incline conveyor 7ft Chain-Belt 26° | 53in(135cm) -57in(145cm) |
| Incline conveyor 8ft Chain-Belt 26° | 57in(145cm) -61in(155cm) |
| Incline conveyor 3ft Chain-Belt 40° | 40in(102cm)-40in(102cm) |
| Incline conveyor 4ft Chain-Belt 40° | 46in(117cm) -46in(117cm) |
| Incline conveyor 5ft Chain-Belt 40° | 57in(145cm) -57in(145cm) |
| Incline conveyor 6ft Chain-Belt 40° | 63in(160cm) -63in(160cm) |
| Incline conveyor 7ft Chain-Belt 40° | 73in(185cm) -73in(185cm) |
| Incline conveyor 8ft Chain-Belt 40° | 79in(210cm) -79in(201cm) |
| Discharge height (E3) | |
| Floor ST (E1) / Conveyor FD (E2) to ground | 29 in (0,74 m) |
| Specifications | |
|---|---|
| PTO shaft - Standard specification | 540 RPM 1" 3/8 Z6 |
| Minimum PTO HP Requirement - High Speed | 40 |
| Auger RPM – Standard High speed | 17 RPM |
| Standard planetary model and ratio configuration | 1603 @25,89 |
| Floor Thickness (AR235 grade or equivalent) | 3/4 in |
| Sidewall Thickness (AR235 grade or equivalent) | 1/4 in |
| Flighting Thickness (AR235 grade or equivalent) | 5/8 in |
| Standard knives per auger | 6 / 10 optional |
| Driveline security | Shear bolt |
| Load cell | 3 |
| Scale system | Option DG500 |
| Machine Weight (empty) - STD configuration | 8890 lb (4032 kg) |
| Utility load capacity | 11 020 lb (4998 kg) |
Do you like this product?
Do you want to offer it to your customers?
Want to become the distributor of your area?
